FUSING/PAPER EXIT
3.8.9 HOT ROLLER STRIPPERS
1. Oil supply unit (! 3.8.2)
2. Fusing lamps (! 3.8.6)
3. Fusing inner unit (! 3.8.7)
4. Gear [A]
NOTE: Remove the gear before
removing the stripper pawl
assembly; otherwise, the
gear may be damaged.
5. Hot roller stripper pawl assembly [B]
(Spring x 1, x 2)
6. Hot roller stripper pawl [C]
Reassembling
1. Put the spring [D] on the pawl.
2. Put the left end of the pawl in the square opening [E].
3. Put the front and rear ends of the pawl in the holder [F].
4. Confirm that the pawl moves correctly.
3.8.10 FUSING BELT UNIT AND PRESSURE ROLLER UNIT
1. Fusing inner unit (! 3.8.7)
2. Springs [A] [B]
3. Separate the fusing belt unit [C] and
the pressure roller unit [D].
B051/B052
CÓPIA NÃO CONTROLADA
[F]
[D]
[E]
[A]
3-30
CÓPIA NÃO CONTROLADA
[C]
[C]
[D]
[B]
[A]
B051R502.WMF
[B]
B051R513.WMF
SM