Ricoh B051 Service Manual page 185

No.
Definition
793 D Interchange unit error
The machine recognizes the duplex
unit/1-bin tray unit, but does not
recognize the interchange unit.
800 B Startup without video output end error (K)
Video transfer to the engine is
started, but a video transmission end
command is not issued by the engine
within the specified time.
801 B Startup without video output end error (Y)
Video transfer to the engine is
started, but a video transmission end
command is not issued by the engine
within the specified time.
802 B Startup without video output end error (M)
Video transfer to the engine is
started, but a video transmission end
command is not issued by the engine
within the specified time.
803 B Startup without video output end error (C)
Video transfer to the engine is
started, but a video transmission end
command is not issued by the engine
within the specified time.
804 B Startup without video input end error (K)
Video transfer to the engine is
started, but a video transmission end
command is not issued by the
scanner within the specified time.
805 B Startup without video input end error (Y)
Video transfer to the engine is
started, but a video transmission end
command is not issued by the
scanner within the specified time.
806 B Startup without video input end error (M)
Video transfer to the engine is
started, but a video transmission end
command is not issued by the
scanner within the specified time.
807 B Startup without video input end error (C)
Video transfer to the engine is
started, but a video transmission end
command is not issued by the
scanner within the specified time.
808 B Startup without video input end error (R)
Video transfer to the engine is
started, but a video transmission end
command is not issued by the
scanner within the specified time.
809 B Startup without video input end error (G)
Video transfer to the engine is
started, but a video transmission end
command is not issued by the engine
within the specified time.
SM
CÓPIA NÃO CONTROLADA
Symptom
4-13
CÓPIA NÃO CONTROLADA
Possible Cause
• Incorrect installation
• Defective connector
• Defective cable
• Defective controller board
• Defective controller board
• Defective controller board
• Defective controller board
• Defective controller board
• Defective controller board
• Defective controller board
• Defective controller board
• Defective controller board
• Defective controller board
SERVICE CALL
B051/B052