Ricoh B051 Service Manual page 189

No.
Definition
925 D Net file error
The management file for net files is
corrupted; net files are not normally
read.
Netfiles: Jobs to be printed from the
document server using a PC and the
DeskTopBinder software
990 B Software performance error
The software attempted to perform an
unexpected operation.
NOTE: When this error occurs, the
file name, address, and data
will be stored in NVRAM. This
information can be checked
by using SP7-403. See the
data and the situation in
which this SC occurs. Then
report the data and conditions
to your technical control
center.
991 C Software continuity error
The software attempted to perform an
unexpected operation. However,
unlike SC990, the process can keep
on running.
992 D Other system SCs
The controller received an unknown
SC code from the engine.
997 B Application function selection error
The application selected by a key
press on the operation panel does not
start or ends abnormally.
998 B Application start error
• After switching the machine on, the
application does not start within 60
s. (No applications start or end
normally.)
999 B Program download error
The download (program, print data,
language data) from the IC card does
not execute normally.
Important Notes About SC999
• This SC is not logged, because it
operates primarily in the download
mode.
• If the machine loses power while
downloading, or if for some other
reason the download does not end
normally, this could damage the
controller board or the PCB
targeted for the download and
prevent subsequent downloading. If
this problem occurs, the damaged
PCB must be replaced.
SM
CÓPIA NÃO CONTROLADA
Symptom
4-17
CÓPIA NÃO CONTROLADA
Possible Cause
• Defective hardware
• Data corruption
• Defective software
• Software defective
• Internal parameter incorrect
• Insufficient working memory
• Logged only; the machine can continue
to operate
• Contact your product specialist.
• Software defective
• An option required by the application
(RAM, DIMM, board) is not installed.
• Software defective
• An option required by the application
(RAM, DIMM, board) is not installed.
• Software defective
• An option required by the application
(RAM, DIMM, board) is not installed
• Board installed incorrectly
• BICU defective
• Controller defective
• IC card defective
• NVRAM defective
• Loss of power during downloading
SERVICE CALL
B051/B052