3.13.4
Fine adjustment of binding/folding position (Saddle stitcher unit)
The binding position/folding position can be adjusted in the following (05) codes.
Code
Paper size
468-0
A4-R / LT-R
468-1
468-2
A3 / LD
Increase the adjustment value when the sheet of paper which has exited is "A".
Decrease the adjustment value when the sheet of paper which has exited is "B".
A: When the upper side of the folding is longer
than the lower side
Paper feeding direction
e-STUDIO350/352/353/450/452/453
ADJUSTMENT
When the value increases, the binding/folding posi-
tion shifts toward the right page. (0.25mm/step)
B4
Acceptable values: -14 to 14 (Default: 0)
Remarks
B: When the upper side of the folding is shorter
than the lower side
Paper feeding direction
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
3 - 98