Toshiba e-STUDIO350 Service Handbook page 398

(5) Connect the connector of the counter socket
to the harness connector of the equipment
side.
(6) Install the counter socket to the machine
frame with two M3 screws.
(7) Reattach the cover.
(8) Insert the key copy counter with its arrow
mark pointing the rear side of the equipment.
(9) Enter the value "3" in the setting mode (08-202).
e-STUDIO350/352/353/450/452/453
ADJUSTMENT
Counter socket
Screw
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
3 - 110
Harness connector
Fig. 3-151
Key copy counter
Fig. 3-152