Toshiba e-STUDIO350 Service Handbook page 662

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO350:
Table of Contents

Advertisement

[C] Display during the update
The processing status is displayed as follows on the LCD screen during the update. (As an example,
the display for updating the system ROM is explained below.)
Turn ON the power while [4] button and [9] button are pressed simultaneously.
Turn ON the power while [4] button and [9] button are pressed simultaneously.
e-STUDIO350/352/353/450/452/453
FIRMWARE UPDATING
The initial screen is displayed and the recogni-
tion of the USB storage device connected to
the equipment is started.
When the device is recognized properly after 3
minutes, the screen for selecting items is dis-
played.
Press the [START] button after selecting the
item to be updated. The device check starts.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
6 - 86
04/10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents