Toshiba e-STUDIO350 Service Handbook page 261

<<Procedure to copy the total counter value (08-257)>>
(1) Turn ON the power while [0] and [8] are pressed simultaneously.
(2) Key in the code "257" and press the [START] button (the following is displayed).
Note: Note:
Before performing the following operations, note the current counter values.
(3) Key in the value "1" or "2" and press the [START] button.
The value entered is displayed on the left of the "%", and the [ENTER] button is displayed.
Note: Note:
The value can be erased by pressing the [CLEAR] button to change as long as the [START] but-
ton is not pressed. (The value on the left of the "%" is reset to "0" by pressing the [CLEAR] but-
ton.)
• Key in "1" to copy the value of the total
counter (LGC board) (A) onto the value of
the backup counter (SYS board) (B).
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
(A)
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 241
05/12
(B)
e-STUDIO350/352/353/450/452/453
2