Checking And Replacing The Cleaning Roller - Toshiba e-STUDIO350 Service Handbook

4.9.5

Checking and replacing the cleaning roller

(1) Handling precautions
Never allow solvents such as paint thinner to touch to the cleaning rollers.
(2) Poor cleaning and corrective treatment
Judgment should be made depending on how much toner has been deposited on the pressure
roller surface. When its surface is stained with toner, check the cleaning roller. If toner is heavily
adhered on the cleaning roller, it means the cleaning performance is declined and the cleaning
roller should be replaced with new ones.
The cleaning roller is gradually worn out due to the heat and toner stain.
Replace it when a specified number of output pages have been made.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
4 - 35
e-STUDIO350/352/353/450/452/453
PREVENTIVE MAINTENANCE (PM)
4