Toshiba e-STUDIO350 Service Handbook page 323

(20) Fix the front door switch to be closed with the
door switch jig.
(21) After the adjustment, remove the jigs in a
reverse procedure to return it to the original
state.
[ 1-2 ] Connection
(1) Connection for developer bias adjustment
Front cover
opening/closing switch
(–) terminal:
Connected to the machine frame
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
(+) terminal:
Connect in the hole at the front
side of the developer unit
Fig. 3-29
3 - 35
Door switch jig
Fig. 3-28
e-STUDIO350/352/353/450/452/453
ADJUSTMENT
3