Toshiba e-STUDIO350 Service Handbook page 613

(4) Connect the download jig with the jig connector (CN100) on the SYS board.
(5) Turn ON the power while [8] button and [9] button are pressed simultaneously.
The screen for selecting the items to be updated is displayed. "*" is displayed next to the items to
be updated. (All items are selected in the default settings.)
When the FROM basic section software version to be updated is "V1.00 / 1.12" or earlier:
When the FROM basic section software version to be updated is "V1.00 / 4.22" or later:
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Connector
Fig. 6-31
Fig. 6-32
Fig. 6-33
6 - 37
06/10
e-STUDIO350/352/353/450/452/453
FIRMWARE UPDATING
6