2.2.2
Input check (Test mode 03) (e-STUDIO352/353/452/453)
The status of each input signal can be checked by pressing the [FAX] button, and the digital keys in
the test mode (03).
<Operation procedure>
[0][3]
[START]
[POWER]
Note:
Note:
Initialization is performed before the equipment enters the test mode.
[Digital key]
[0][5]
(Code)
[POWER]
Items to be checked and the condition of the equipment when the buttons [A] to [H] are highlighted are
listed in the following pages.
e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
[FAX]
[Digital keys]
[CLEAR]
Automatic
(
[START]
adjustment
*[CANCEL] or [CLEAR]
Fig. 2-3 Example of display during input check
2 - 34
07/11
(LCD ON)
[POWER] OFF/ON
[POWER]OFF/ON
)
([FAX])
(Test copy)
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
(Exit)
(Exit)