[B] Adjusting carriages-1 and -2 positions
(1)
Move the carriage-2 toward the exit side.
(2)
Loosen the screws fixing the front side pulley bracket, make the sections A and B of the carriage-
2 touch with the inside of the exit side frame and screw them up.
[Rear]
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Carriage-2
B
Fig. 3-34
3 - 41
Pulley bracket
Exit side frame
Enlarged view of carriage
A
e-STUDIO350/352/353/450/452/453
[Front]
3
ADJUSTMENT