Toshiba e-STUDIO350 Service Handbook page 694

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO350:

Table of Contents

The followings are two output channels which are linked with the door switch.

Output to the LGC board

CN414 Pins 1 and 2

Output to the LGC board, PFP/LCF (via LGC board)

Output to the power supply cooling fan

CN414 Pins 5 and 6

Output to the LGC board, Bridge unit / Job separator / Offset tray (via LGC

CN415 Pins 1 and 2

Output to the RADF

CN415 Pins 9 and 10

Output to the SLG board

Output to the finisher

1) Not linked with the door switch

For the SYS board

For the LGC board, FIL board / FUS board, FAX board (e-STUDIO350/450 only),

PFP/LCF (via LGC board), Bridge unit / Job separator / Offset tray (via LGC

For the SLG board, RADF

For the finisher

2) Linked with the door switch

For the LGC board, PFP/LCF (via LGC board), Bridge unit / Job separator / Off-

set tray (via LGC board)

For the SLG board, RADF

For the finisher

For the power supply cooling fan

e-STUDIO350/352/353/450/452/453

POWER SUPPLY UNIT

Show Quick Links

Chapters

Table of Contents