Toshiba e-STUDIO350 Service Handbook page 379

(3) The tension becomes loose.
While pushing the bracket down, hold the tray and move it up or down, to adjust the angle so that
the tray becomes parallel by a visual check.
(4) After the height adjustment, tighten the fixing screw of the bracket.
Note: Note:
If the fixing screw of the bracket is not fixed, the belt is loosened which may cause a skipped
tooth.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 3-130
Fig. 3-131
3 - 91
e-STUDIO350/352/353/450/452/453
ADJUSTMENT
3