Table of Contents
Advertisement
3 Copy
Step 4 Starting the Copy Job
The following describes how to start a copy job.
1
Press the <Start> button.
Important • If the document has been loaded in the
Note
If you have more documents
If you have more documents to copy, select
[Next Original] on the touch screen while the current document is being scanned. This
allows you to scan the documents as a single set of data.
2
Select [Next Original] while scanning is in
3
progress.
Note
3
Load the next document.
4
Press the <Start> button.
If you have more documents, repeat steps 3
and 4.
5
When all documents have been scanned,
select [Last Original].
70
document feeder, do not hold down the
document while it is being conveyed.
• If a problem occurs, an error message
appears on the touch screen. Solve the
problem according to the message.
• You can set the next job during copying.
• When using the document feeder, load
the next document after the machine has
finished scanning the first document.
• When [Next Original] is displayed on the
screen shown on the right and no
operation is performed for a certain period
of time, the machine automatically
assumes that there are no more documents.
• You can change the number of copies by selecting [Change Quantity] that is displayed after
selecting [Delete].
1
2
3
4
5
6
7
8
9
0
#
C
<Start> button
Advertisement
Table of Contents
