Konica Minolta Magicolor 8650 Service Manual page 120

Field Service Ver. 2.0 Nov. 2007
[1]
[1]
Confidential – for internal use only, do not distribute
[2]
A02EF2C076DA
A02EF2C077DA
[1]
[2]
9J06F2C575DA
5. Unhook the tab [1], and remove the
gear [2] of the PH unit.
NOTE
• This step is not needed when
removing PH unit (Black) that does
not have a gear.
6. Remove the stopper [1] of the PH
unit.
NOTE
• When removing the stopper, use
care so that both ends of the stop-
per will not open but stay parallel as
shown on the left.
Keep using the stopper after once
stretched out may cause uneven
pitch or other image troubles.
7. Remove the PH unit.
Move the front side of the PH unit to
left a little, and remove the boss [1]
from the locating hole [2].
Lift up the front side of the PH unit a
little.
6. Other
79