10.11 Internet Isw; Internet Isw Set; Http Settings - Konica Minolta Magicolor 8650 Service Manual

Field Service Ver. 2.0 Nov. 2007

10.11 Internet ISW

• By using this setting, the firmware stored in the server can be downloaded over internet
for upgrading.
• For details for upgrading the firmware, refer to "Firmware upgrade" in the Maintenance
section.
See P.45
10.11.1

Internet ISW Set

Functions • To set whether or not to enable each setting for Internet ISW.
Use • To use when upgrading the firmware by Internet ISW.
• Each setting such as Server setting will be valid by setting this to "Enable".
NOTE
• When the following setting is set to "ON", this setting will automatically be set
to "Disable" and cannot be changed.
[Admin. Settings] → [Security Settings] → [EnhancedSecurity]
Setting/ • The default setting is Disable.
Procedure
10.11.2

HTTP Settings

• It will be displayed only when [Internet ISW Set] is set to "Enable".
A. Data Retrieval Set
Functions • To set whether or not to enable downloading using the HTTP protocol.
Use • To use when accessing the server using the HTTP protocol.
• Setting on the proxy server will be valid when this setting is "Enable".
Setting/ • The default setting is Disable.
Procedure
B. Proxy Connection
Functions • To set whether or not to connect via proxy server when accessing the server.
Use • To use when accessing the server via proxy server.
Setting/ • The default setting is OFF.
Procedure
C. Proxy Server
Functions • To set the address and the port number for the proxy server.
Use • To use when accessing the server via proxy server.
Setting/ <Server Address>
Procedure • Enter an address using IPv4, IPv6, or FQDN format.
<Port Number>
• Enter the value between 1 and 65535 using the
(The default setting is 00080)
Confidential – for internal use only, do not distribute
Enable
Enable
ON
10. Service Mode
"Disable"
"Disable"
"OFF"
and keys.
241