Konica Minolta Magicolor 8650 Service Manual page 195

8. Utility Mode
(6) Punch
• The menu is available only when the optional finisher FS-519/FS-609 and punch kit PK-
1
515/PK-501 is mounted.
Functions • To select whether to make punch-holes or not when not specified by the printer driver
during PC printing.
Use • To use when the printer driver cannot specify punching during printing from Windows
DOS, etc.
Setting/ • The default setting is OFF.
Procedure
* The number of punch holes being set is available from [Service Mode] → [Finisher
Adjust] → [Punch Option].
(7) Banner Paper Tray
Functions • To set the feed tray for printing on the banner (front cover) page.
Use • To set the feed tray for printing on the banner (front cover) page.
Setting/
• The default setting is Auto.
Procedure
C. PCL Settings
(1) Font Setting
Functions • To set the font when not specified by the printer driver during PC printing.
Use • To use when the printer driver cannot specify the font during printing from Windows
DOS, etc.
• It can be selected from the Resident font or the download font.
Setting/
• The default setting is 000.
Procedure
(2) Symbol Set
Functions • To set the font symbol set when not specified by the printer driver during PC printing.
Use • To use when the font symbol set cannot be specified by the printer driver during print-
ing from Windows DOS, etc.
Setting/
• The default setting is Roman-8.
Procedure
(3) Font Size
Functions • To set the font size when not specified by the printer driver during PC printing.
Use • To set the font size when it cannot be specified by the printer driver during printing
from Windows DOS, etc.
• To set scalable font (: Point) and bitmap font (: Pitch) respectively.
Setting/ • The default setting is
Procedure Scalable Font : 012.00 points
Bitmap Font
154
Confidential – for internal use only, do not distribute
2-Hole/3-Hole/4-Hole
: 10.00 pitch
Field Service Ver. 2.0 Nov. 2007
"OFF"