Konica Minolta Magicolor 8650 Service Manual page 215

8. Utility Mode
(5) TRAP Settings
<TRAP Settings>
Functions
• To select whether to allow or restrict TRAP Settings of SNMP.
Use
Setting/ • The default setting is Allow.
Procedure
<TRAP when Auth. Fails>
Functions
• To select whether or not to use TRAP when Auth. Fails.
Use
Setting/ • The default setting is OFF.
Procedure
G. AppleTalk
NOTE
• When the setting is changed, turn off the power switch and turn it on again more
than 10 seconds after.
(1) AppleTalk Setting
Functions • To set whether to enable or disable the AppleTalk setting.
Use • To use AppleTalk setting.
Setting/ • The default setting is OFF.
Procedure
(2) Printer Name
Functions • To set the printer name displayed on the AppleTalk network.
Use • To set the printer name displayed on the AppleTalk network.
Setting/
• Enter the printer name (up to 31 characters) using
Procedure
Menu/Select key.
(3) Zone Name
Functions • To set the zone name connected with AppleTalk network.
Use • To set the zone name connected with AppleTalk network.
Setting/
• Enter the zone name (up to 31 characters) using
Procedure
Menu/Select key.
H. Bonjour
(1) Bonjour Setting
Functions • To set whether or not to use the Bonjour setting.
Use • To use when operating under the Bonjour service environment.
Setting/ • The default setting is ON.
Procedure
174
Confidential – for internal use only, do not distribute
"Allow"
ON
ON
"ON"
Field Service Ver. 2.0 Nov. 2007
Restrict
"OFF"
"OFF"
and keys, and press the
and keys, and press the
OFF