10.10 Counter; Procedure; Life - Konica Minolta bizhub C450 Service Manual

Field Service Ver. 1.0 Mar. 2005

10.10 Counter

• The Counter displays the counts of various counters to allow the Technical Representa-
tive to check or set as necessary.
10.10.1

Procedure

1. Touch "Counter" to show the Counter menu.
2. Select the specific counter to be displayed.
3. To clear the counts of two or more counters within a group or across different groups at
once, touch "Counter Reset," select the specific counters to be cleared, and touch
"END." Two or more counters can be selected.
10.10.2

Life

Functions • To check the number of hours or times each of the different maintenance parts has
been used.
• To clear the count of each counter.
Use • When each of the maintenance parts is replaced.
Setting/ • To clear the count of a counter, select the specific part and press the Clear key.
Procedure • If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing
operation.
• It is not possible to clear the count of the counters for the Fusing Unit, Transfer Belt
Unit, and IU, which are provided with a new unit detection function.
<1>
• Fusing Unit
• Transfer Roller Unit
• Transfer Belt Unit
• Paper Dust Remover/
Ozone Filter
• 1st.
• 2nd.
• 3rd.
• 4th.
• Manual Tray
<2>
• Cyan IU
• Magenta IU
• Yellow IU
• Black IU
• LCT Parts
• ADF Feed
• ADF Reverse : Number of sheets of paper fed through the turnover unit of the ADF
• Sorter/Finisher : Number of sheets of paper fed out of the Sorter/Finisher
: Number of times a sheet of paper is fed through
: Number of times a sheet of paper is fed through
: Number of times a sheet of paper is fed through
: Number of times a sheet of paper is fed through
: Number of sheets of paper fed from Tray 1
: Number of sheets of paper fed from Tray 2
: Number of sheets of paper fed from Tray 3
: Number of sheets of paper fed from Tray 4
: Number of sheets of paper fed from the Bypass
: Period of time over which the Cyan Developing Unit has been used.
: Period of time over which the Magenta Developing Unit has been
used.
: Period of time over which the Yellow Developing Unit has been used.
: Period of time over which the Black Developing Unit has been used.
: Number of sheets of paper fed from the LCT
: Number of sheets of paper fed through the take-up section of the
ADF
10. Service Mode
269