Konica Minolta Magicolor 8650 Service Manual page 333

14. Malfunction code
Code Item
C0211 Tray 1 feeder up/down
abnormality
C0212 LCT ejection failure
C0213 LCT shift gate malfunction
C0214 LCT shifting failure
C0215 LCT shift motor
malfunction
C0301 Suction fan motor's
failure to turn
C1004 FNS communication error
C1180 Transport system drive
1
malfunctions
C1181 Paddle motor
1
malfunctions
C1182 Unsupported option trouble
C1183 Finishing option elevator
drive malfunction
1
C1190 Finishing option aligning
bar moving mechanism
malfunction 1
C1191 Finishing option aligning
bar moving mechanism
malfunction 2
C1192 Front aligning plate motor
1
malfunctions
C1193 Rear aligning plate motor
1
malfunctions
C11A0 Paper holding drive failure
C11A1 Finishing option exit roller
pressure/retraction failure
C11A2 Saddle exit roller pres-
sure/retraction failure
C11A3 Shutter drive failure
292
Confidential – for internal use only, do not distribute
Detection timing
• The paper feed tray 1 lift-up position sensor
is not unblocked even when the transport
motor has turned for a given number of
pulses after the sequence to move the
paper lifting plate from the standby position
to the feed position was started.
• The paper feed tray 1 lift-up position sensor
is not blocked even when the transport
motor has turned for a given number of
pulses after the sequence to move the
paper lifting plate from the feed position to
the standby position was started.
See P.32 of the PC-406 service manual.
• The fan lock signal remains HIGH for a pre-
determined continuous period of time while
the motor remains stationary.
See P.73 of the FS-519/PK-515/OT-602 ser-
vice manual.
See P.65 of the FS-609/PK-501 service man-
ual.
See P.73 of the FS-519/PK-515/OT-602 ser-
vice manual.
See P.65 of the FS-609/PK-501 service man-
ual.
See P.73 of the FS-519/PK-515/OT-602 ser-
vice manual.
See P.65 of the FS-609/PK-501 service man-
ual.
See P.73 of the FS-519/PK-515/OT-602 ser-
vice manual.
See P.38 of the SD-505 service manual.
See P.73 of the FS-519/PK-515/OT-602 ser-
vice manual.
Field Service Ver. 2.0 Nov. 2007
Trouble iso-
lation com-
pliant unit
Tray 1
LCT
LCT
LCT
LCT
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
Rank
B
B
B
B
B
B
C
B
B
B
B
B
B
B
B
B
B
B