Field Service Ver. 2.0 Nov. 2007
2.4
Updating the firmware with the Internet ISW
2.4.1
Outline
• [Internet ISW] is the system where the firmware update instructions are sent to the main
body via the control panel so that the main body will automatically receive the latest firm-
ware data from the program server over a network. Using Internet ISW allows updating
the firmware while CE is visiting a customer site without bringing the latest firmware data.
2.4.2
Service environment
The following conditions are necessary for using the Internet ISW function.
• The main body is connected to such a network environment that the firmware can be
downloaded on the internet using the ftp or http protocol.
The "Internet ISW" will not operate under the following conditions.
• Power switch is set to OFF.
• When the following setting is set to "ON":
[Admin. Settings] → [Security Settings] → [EnhancedSecurity]
• The main body has the job currently performing.
2.4.3
Preparations for firmware rewriting
• For using the Internet ISW, the network parameter, program server address as well as
firewall address need to be set to the main body.
• For details of each setting item, refer to Adjustment/Setting "Internet ISW".
See P.241
A. Internet ISW Set
1. Call the Service Mode to the screen.
2. Select [Internet ISW Set] which is available from [Internet ISW].
3. Select [Enable], and press the Menu/Select key.
NOTE
• Settings such as server setting, etc. will be available by selecting "Enable" on this
setting.
• When the following setting is set to "ON", "Enable" cannot be selected on this set-
ting.
[Admin. Settings] → [Security Settings] → [EnhancedSecurity]
Confidential – for internal use only, do not distribute
Internet ISW Set
Enable
Disable
2. Firmware upgrade
A02EF2E602DA
9