10.10 Counter; Procedure; Life - Konica Minolta bizhub C353 Service Manual

Field Service Ver. 4.0 Jun. 2008

10.10 Counter

• The counter displays the counts of various counters to allow the technical representative
to check or set as necessary.
10.10.1

Procedure

1. Touch [Counter] to show the counter menu.
2. Select the specific counter to be displayed.
3. To clear the counts of two or more counters within a group or across different groups at
once, touch [Counter Reset], select the specific counters to be cleared, and touch
[END]. Two or more counters can be selected.
10.10.2

Life

Functions • To check the number of hours or times each of the different maintenance parts has
been used.
• To clear the count of each counter.
Use • When each of the maintenance parts is replaced.
Setting/ • To clear the count of a counter, select the specific part and press the Clear key.
Procedure • If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing
operation.
• It is not possible to clear the count of the counters for the fusing unit, transfer belt
unit, Imaging Unit and TCR new article detection, which are provided with a new unit
detection function.
<1>
• Fusing Unit
• Image Transfer Belt Unit
• 1st.
• 2nd.
• 3rd.
• 4th.
• Manual Tray
<2>
• Imaging Unit (C)
• Imaging Unit (M)
• Imaging Unit (Y)
• Imaging Unit (K)
• LCT Parts
• ADF Feed
• ADF Reverse
• Sorter/Finisher
: Number of times a sheet of paper is fed through
: Number of times a sheet of paper is fed through
: Number of sheets of paper fed from tray 1
: Number of sheets of paper fed from tray 2
: Number of sheets of paper fed from tray 3
: Number of sheets of paper fed from tray 4
: Number of sheets of paper fed from the bypass
: Period of time over which the cyan imaging unit has
been used.
: Period of time over which the magenta imaging unit has
been used.
: Period of time over which the yellow imaging unit has
been used.
: Period of time over which the black imaging unit has
been used.
: Number of sheets of paper fed from the LCT
: Number of sheets of paper fed through the take-up sec-
tion of the ADF
: Number of sheets of paper fed through the turnover unit
of the ADF
: Number of sheets of paper fed out of the sorter/finisher
10. Service Mode
405