6. Other
6.3.26
Right door assy
1. Remove the lower rear cover/1 and the lower rear cover/2.
See P.73
2. Remove the paper feed tray 1 unit.
See P.83
3. Remove the high voltage unit.
See P.105
4. Slide out the paper feed tray 2.
5. Remove the right front cover/2.
See P.67
[2]
[3]
[1]
[1]
[2]
92
Confidential – for internal use only, do not distribute
[2]
A02EF2C363DA
[2]
[1]
A02EF2C111DA
[1]
[1]
[2]
A02EF2C355DA
Field Service Ver. 2.0 Nov. 2007
6. Remove the harness from the edge
cover [1].
7. Remove four screws [2], and remove
the metal plate [3].
8. Remove two screws [1], and remove
the rear handle cover [2].
9. Remove eight screws [1], and
remove two reinforcement plates [2]
of the right door.