Action When Data Transfer Fails - Konica Minolta Magicolor 8650 Service Manual

Konica minolta magicolor 8650 laser printer service manual

Hide thumbs Also See for Magicolor 8650:

Table of Contents

5. Firmware upgrade

Action when data transfer fails

• If "Failed to Download" appears on the control panel, indicating that rewriting has been

unsuccessful (in which case the Start key lights up red), take the following steps.

1. Perform the data rewriting procedure again.

2. If the procedure is abnormally terminated, change the compact flash for a new one and

try another rewriting sequence.

3. If the procedure is still abnormally terminated, change the board and carry out data

rewriting procedure.

MFP CONTROLLER

*1: The optional finisher FS-519 or FS-609 is necessary for the above procedure.

Confidential – for internal use only, do not distribute

MFP board (MFPB)

Printer control board (PRCB)

FS control board (FSCB) *1

Field Service Ver. 2.0 Nov. 2007

Table of Contents