5. Firmware upgrade
2. Double-click the firmware data, and specify the directory to be uncompressed, and
then uncompress it.
NOTE
• When old firmware is still left in the specified directory to be uncompressed,
delete it before uncompressing.
• When the firmware data is decompressed, "card_work" folder is created in the
selected directory and the data is decompressed in this folder.
3. Mount the compact flash on the PC, and check the drive name, which was recognized
in the Windows. (F-drive in the following figure)
4. Click [Start] → [Program] → [Accessories] → [Command Prompt] to open the com-
mand prompt.
5. Use the command prompt to move into the uncompressed directory.
46
Confidential – for internal use only, do not distribute
Field Service Ver. 2.0 Nov. 2007
A02EF2C277DA
4036fs2623e0