Crease Roller - Konica Minolta Magicolor 8650 Service Manual

Field Service Ver. 1.0 Oct. 2007
Precaution for in & out guide motor reinstallation
1. Press the two in & out guides [1] in and check that they touch the stopper [2] simulta-
neously.
2. Check that pins [4] can be inserted through the positioning holes [3] (3 holes) of the in
& out guide sensor assy.
3. Use two screws to secure the in & out guide motor.
3.3.8

Crease roller

1. Remove the crease unit.
See P.9
[2]
[3]
[1]
Confidential – for internal use only, do not distribute
[2]
[1]
[2]
4511F2C565DA
[1]
[4]
2. Remove two springs [1] and four
screws [2], and remove the upper
plate [3].
3. Other
[3]
4511F2C533DA
17