Konica Minolta Magicolor 8650 Service Manual page 214

Field Service Ver. 2.0 Nov. 2007
<Write User Settings: Write User Name>
Functions
• To set the name of the reading/writing authority user which is used for SNMP v3.
Use
Setting/
• Enter the write user name (up to 32 characters) using
Procedure
Menu/Select key.
NOTE
• The user name same with the discovery use name cannot be used.
<Write User Settings: Security Level>
Functions • To set the security level for the reading/writing authority user which is used for SNMP
v3.
Use • To use for changing the security level of the reading/writing authority user.
OFF
Auth-password
Auth/Priv-password : Conducts authentication by authentication password and
Setting/ • The default setting is Auth/Priv-password.
Procedure
OFF
NOTE
• [OFF] cannot be selected when the following setting is set to "ON."
[Admin. Settings] → [Security Settings] → [EnhancedSecurity]
<Write User Settings: Password>
Functions
• To set the Authentication password for the write-only User which is used for SNMP
v3.
Use
Setting/ 1. Select a type of password.
Procedure 2. Enter the password (up to 32 characters) using
Menu/Select key.
<Encrypt Algorithm>
Functions
• To set the Encrypt Algorithm to be used for SNMP v3.
Use
Setting/ • The default setting is DES.
Procedure
<Auth. Method>
Functions
• To set the Auth. Method to be used for SNMP v3.
Use
Setting/ • The default setting is MD5.
Procedure
Confidential – for internal use only, do not distribute
: Authentication will not be conducted when reading/writing
authority user accesses.
: Conducts authentication only with authentication password
when reading/writing authority user accesses.
privacy password when reading/writing authority user
accesses.
Auth-password
"DES"
"MD5"
8. Utility Mode
and keys, and press the
"Auth/Priv-password"
and keys, and press the
AES_128
SHA-1
173