User Setting Function Setting Procedure; Print Reports - Konica Minolta Magicolor 8650 Service Manual

Field Service Ver. 2.0 Nov. 2007
8.7

User setting function setting procedure

8.7.1

Print Reports

Functions • To output the report or Demo Page concerning the print setting.
Use • To check the setting concerning the printer.
• The types of report available for output are as follows.
Configuration
GDI Demo Page
Statistics Page
PS Font List
PCL Font List
Meter Count
Consumables
1. Select [User Settings] → [Print Reports].
Setting/
Procedure 2. Select the report to be output.
3. Select 1-Sided Print or 2-Sided Print and press the Menu/Select key to produce an
output of the list.
A. Statistics Page
(1) Consumable Info
• Display the estimated percent of life remaining in the toner cartridge and print unit.
• Display the status of the waste toner bottle and the staple unit.
NOTE
• The percent of life remaining in the toner cartridge or print unit can be used as a
guide, but may not exactly reflect the amount that has been used in the toner car-
tridge or print unit.
(2) Periodic Replacement Parts
• Display the estimated percent of life remaining in periodic replacement parts and units
such as the transfer belt and fusing unit.
Confidential – for internal use only, do not distribute
: The list of printer setting will be output.
: The test page will be output.
: The list of printer use status will be output.
Consumable Info, Periodic Replacement Parts, Counter
Information, Paper Information, Coverage Information
: PS font list will be output.
: PCL font list will be output.
: The total counter of various types will be output.
: The life counter of consumables will be output.
8. Utility Mode
145