System Settings Function Setting Procedure; System Settings - Konica Minolta Magicolor 8650 Service Manual

Field Service Ver. 2.0 Nov. 2007
8.8

System settings function setting procedure

8.8.1

System Settings

A. Date/Time Settings
Functions • To set the date/time and the time zone to start the clock.
Use • To change settings concerning the date/time.
Setting/ • For time zone, set the time difference with the world standard time.
Procedure • Setting range for the time zone: -12:00 to +12:00 (by 30 minutes)
• When the following setting is set to "ON", [Time Adjustment] will be displayed. Press
the Menu/Select key and modify the time.
[System Settings] → [Network Settings] → [Detail Settings] → [TimeAdjustmentSet]
B. Daylight Saving
Functions • To set whether to set the daylight saving time.
• To set the time difference in setting the daylight saving time.
Use • To set the daylight saving time.
Setting/ <DST Setting>
Procedure • The default setting is OFF.
<Saving Time>
• When setting to ON, set the time difference to move up.
C. LCD Brightness
Functions
• To adjust LCD Brightness of the control panel.
Use
Setting/ • The default setting is 0.
Procedure
D. Management List
(1) Job Settings List
Functions
• To output the value set by the setting menu.
Use
1. Select [System Settings] → [System Settings] → [Management List] → [Job Settings
Setting/
Procedure List].
2. Select 1-Sided Print or 2-Sided Print and press the Menu/Select key to produce an
output of the list.
Confidential – for internal use only, do not distribute
ON
"060 Minute(S)" (001 to 150)
"0" (-3 to +3)
8. Utility Mode
"OFF"
157