Konica Minolta Magicolor 8650 Service Manual page 456

Field Service Ver. 2.0 Nov. 2007
Error code
Control panel
FTP error
0x00002### • Error reply code for the user command
or pass command
FTP error
0x00003###
• Error reply code for CWD command
FTP error
0x00004### • Error reply code for the TYPE com-
mand.
FTP error
0x00005### • Error reply code for the PORT com-
mand.
FTP error
0x00006### • Error reply code for the PASV com-
mand.
FTP error
0x00007### • Error rely code for the RETR com-
mand.
• It cannot be accepted because of the
0x1000 0100 job currently being executed.
• ISW being executed by other method.
• The Internet ISW is already being exe-
0x10000102
cuted.
• It failed to prohibit the job. (It failed to
lock the operation.)
→ It failed to lock the job because the
0x10000103
operation is already locked with
PSWC, etc.
• There is no space for F/W data to be
0x10000104
downloaded.
0x10000106 • Check sum error
File access error
• The file downloaded has an error.
• The header of the file which has been
read has an error.
0x10000107
• The size of the file to be downloaded is
too large.
• When it is identified to be the different
type of F/W.
Confidential – for internal use only, do not distribute
Description
2. Firmware upgrade
Countermeasure
• Check to see if FTP server operates
normally.
• Check to see if FTP server operates
normally.
• Check to see if FTP server operates
normally.
• Set the PASV mode to "Disable", and
try it again.
• Check to see if FTP server operates
normally.
• Wait for about 30 minutes and try it
again.
• Wait for the current job to be completed
and try it again.
• Wait for the current Internet ISW to be
completed.
• Check if the following setting is set to
"Enable".
[Service Mode] → [Internet ISW] →
[Internet ISW Set]
• If the above process does not solve the
problem, inform the corresponding
error code to the KONICA MINOLTA.
• Check to see if the downloaded F/W is
of the correct type.
15