4. Finisher Adjust
4.2
Punch Option
4.2.1
Punch Kit type
Functions
• To set installation and model of the punch kit.
Use
• Use when the punch kit is installed.
Setting/
• The default setting is Not Installed.
Procedure
• Select the model of the punch kit currently installed.
4.2.2
# of Punch-Holes
Functions
• To set the number of holes to be made by the punch kit installed.
Use
• Use when the punch kit is installed.
Setting/
• The default setting is 2-Hole.
Procedure
NOTE
• Select only the number of holes supported by the punch kit installed.
36
Confidential – for internal use only, do not distribute
"Not Installed"
"2-Hole"
SWE 4-Hole
Field Service Ver. 1.0 Nov. 2007
PK-501
PK-515
EU 4-Hole
2-Hole/3-Hole