Konica Minolta Magicolor 8650 Service Manual page 484

Field Service Ver. 1.0 Oct. 2007
[1]
11. Perform another test print and check the reference deviation.
12. Repeat the adjustment until the reference line falls within the specified range.
13. Tighten the adjustment screw.
14. Repeat steps 1 to 13 similarly for the paper feed tray 5.
15. Press the Menu/Select key.
16. Turn OFF the power switch, then wait for 10 sec. or more and turn ON the power
switch.
Confidential – for internal use only, do not distribute
10. Watching the graduations [1] pro-
vided in the drawer, move the edge
guide [2] in the rear.
• If width A is greater than the specified
value, move the edge guide toward the
[2]
front.
• If width A is smaller than the specified
value, move the edge guide toward the
rear.
A093F3C503DA
5. Mechanical adjustment
19