Magneto; Oil Ring; Top Ring And 2Nd Ring - Suzuki DR350 Service Manual

MAGNETO
• Fit the key
CD
in the key slot on the c rankshaft , then
in ~
stall the magneto ro tor.
CAUTION ,
Degrease the tapered portion of the magneto rotor and also
the crankshah .
• Apply
a
small quantity o f THREAD LO CK SUPER
"130311305" to the threaded part of nut.
99000 - 32030 , THREAD LOCK SUPER " 1303" IU .S.A .I
99000 - 32100 , THREAD LOCK SUPER " 130S" IOthersl
• Tighten the nut to the specified torque with a 27 mm box-
end wrench .
Tightening torque : 120 - 140 N'm
112.0 - 14.0 kg · m . B7 .0 - 101 .Slb-ftl
Oil RING
Install the spacer
@
into the oil ring groo\le first. Then in -
stall both side rails @ . on, on each side of the spacer . The
spacer and side rails do not have a specific top or bottom
when they are new. When reassembling used parts , insta ll
them in their original place and direction .
TOP RING AND 2ND RING
Top ring and 2nd ring differ in the shape o f ring face . Top
and 2nd rings have the letter " A" and " RN" marked on the
top .
Top ring : " R" mark
2nd ring : " RN " mark
NOTE:
Be sure to bring the marked side to top when filting them
to the piston.
ENGINE 3-42
~
:::
0>-
,
Top ring
2nd ring