Suzuki DR350 Service Manual page 82

4-5 FUEL AND LUBRICATION SYSTEM
• Separate the throttle lever arm
CD
and throttle valve
®
by removing the bolts with a 2 .5 mm hexagon wrench.
• Separate the jet needle
@
and throttle valve
0 .
• Remove the float chamber .
• Remove the accelerating plunger and spring.
• Disconnect the float pin and remove the float with nee-
dle valve .
CAUTION :
When removing the float pin , be careful not to damage the
carburetor body .
• Remove the main jet and palte .
.,