Front Fork Reassembly And Remounting (Dr350V); Inner Tube Metal (Dr350V); Outer Tube Metal, Washer And Oil Seal (Dr350V) - Suzuki DR350 Service Manual

16·25 DR350V/SEV ('9)·MODEl)
REASSEMBLY AND REMOUNTING
Reassemble and remount the front fork in the reverse order
of removal and disassembly. and also carry out the follow-
ing steps:
INNER TUBE METAL
• Install the metal
by
hand.
Use special care to prevent damage to the "Teflon"
coated surface of the antl.friction metal when mount-
ing it .
OUTER TUBE METAL. WASHER AND OIL SEAL
• Install the outer tube metal
<D.
washer
®
and oil seal
@
with the special tool .
09940·50113 : Front fork oil seal installer
[ A
CAUTION [
Use special care to prevent damage to the "Teflon"
coated surface of the anti-friction metal when mount-
ing it .
• Apply grease to the lip of oil seal.
..@I99000-25030 : SUZUKI SUPER GREASE "A"
OIL SEAL STOPPER RING AND OUST SEAL
• Install the oil seal stopper ring
@ .
[ A
CAUTION [
Make sure that the oil s8al stopper ring fitted securely .
• Install the dust seal
®.
DAMPER ROD BOLT/DAMPING FORCE ADJUSTER
• Install the oli lock piece
®
with the damper rod
Q)
to the
outer tube .
•
• Tighten the damper rod bolt/damping force adjuster to the
specified torque .
~
Damper rod bolt/damping force adjuster :
35 N'm 13.5 kg -m . 25. 5 Ib-ftl
I
A
CAUTION
I
Use a new gasket to prevent oil leakage .
-
,