Engine Components Inspection And Servicing; Cylinder Head Cover Servicing; Cylinder Head Cover Distortion - Suzuki DR350 Service Manual

ENGINE COMPONENTS INSPECTION AND SERVICING
CYLINDER HEAD COVER SERVICING
CAUTION:
Be sure to identify each removed part as to
its
locBtion. and
lay the parts out In groups designated as " Exhaust " and " 'n-
let". so that each will be festored to the original location
during assembly.
• Remove the de-comp o cable bracket
CD.
• Remove the de-comp o shaft
@ .
• Remove the intake and exhaust rocker arm shaft set bolts.
• Remove the intake and exhaust rocker arm shafts with
a 6 mm bolt.
CYLINDER HEAD COVER DISTORTION
After removing sealant from the fitting surface of the cylinder
head cover, place the cylinder head cover on a surface plate
and check for distortion with a thickness gauge . Check
points are shown in photograph.
Service Limit : 0 .05 mm 10.002 in)
If the distortion exceeds the limit. replace the cylinder head
cover .
E~GINE
3·14