Starter Clutch Removal (Dr350Ser) - Suzuki DR350 Service Manual

STARTER CLUCH (DR350SER)
REMOVAL
• Drain engine oil.
• Remove the frame covers .
• Remove the seat.
• Disconnect the magneto lead wires after moving the COl
unit.
• Remove the gearshift lever.
• Remove the magneto cover .
• Remove the starter idle gears with shaft.
CD:
Starter idle gear No.1
@:
Starter idle gear No.2
@:
Starter idle gear No.3
• Remove the magneto rotor nut with a 27 mm box-end
wrench .
• Remove the magneto rotor assembly with the special tool.
09930-349 12: Rotor remover
CAUTION :
Do no t hit t he rotor with a ha mmer.
DR350RISER 1'94-MDDEU 13·14