Carburetor (Dr350S/Ses); Pilot Screw Removal And Installation (Dr350S/Ses) - Suzuki DR350 Service Manual

14-
CARBURETOR
PILOT SCREW REMOVAL AND INSTALLATION
• Remove the plug by carefully punching a hole in it using
an awl or suitable tool.
• Before removing the pilot sc rew . determine the setting
by slowly turning it clockwise and count the number of
turns required to lightly seat the screw. Turn t he screw
counte rclockwise to remove
it.
NOTE:
Th is counted number is important when reassembling pilot
screw to original position.
• When installing the pilot screw, turn
it
in fully but not tight-
Iy. From that position turn it out the same number as
counted during removal.
• Install the new plug in the pilot screw hole .
Plug
screw