Caliper And Disc Inspection (Rear Wheel); Caliper Reassembly And Remounting (Rear Wheel) - Suzuki DR350 Service Manual

6·25 CHASSIS
CALIPER AND DISC INSPECTION
Inspect the caliper bore wall for nicks, sc rac hes or o th er
damage.
Inspect the piston for damage and wea r.
Inspect each ru bber part for damage and wea r.
DISC THICKNESS IRefer to page
6 -7 .1
Service limit : 3 .5 mm 10.14 in)
DISC RUNOUT IRefer to page 6 -7 .1
Service limit : 0 .3 mm (0 .012 in)
CALIPER REASSEMBLY AND REMOUNTING
Reassemble and remount the caliper in the reverses order
of removal and disassembly. and also carry out the follow -
ing steps :
• Reassemble and remo unt the caliper. (Aefer to page
6-23 .1
CAUTION:
Wash the caliper components with fresh brake fluid before
reassembly .
Never use cleaning solvent or gasoline to wash them.
Apply brake fluid to the caliper bore and piston to be insert-
ed into the bore.
WARNING :
Bleed air after reassembling the caliper. {Refer to page 2· '2.1