Engine Removal Ano Remounting - Suzuki DR350 Service Manual

ENGINE REMOVAL AND REMOUNTING
ENGIEN REMOVAL
Before taking the engine out of the frame, thoroughly clean
the engine with a suitable cleaner.
The procedure of engine removal is sequentially explained
in the following steps.
• Remove the left and right frame cavers.
• Remove the seat by removing the two bolts.
• Turn the fuel cock lever to "OFF" position .
• Disconnect the fuel hose.
• Remove the fuel tank by removing the four mounting
bolts.
• Remove the engine under cover by removing the four
bolts .
• Drain engine oil. (Refer to page 2-7.J
• Loosen the muffler clamp bolt
CD.
• Remove the exhaust pipe by removing the exhaust bolts
@.
• Disconnect the de-compression cable
@
and cylinder
head breather hose .
• Remove the high tension cord clamp.
• Disconnect the spark plug cap.
• Disconnect the magneto lead wires
@ .
• Loosen the lock nuts
®
and disconnect the throttle ca-
bles (pulling cable
®
and returning cable
<V).
• Remove the carbu rator by loosening the clamp screws.