Brake Pad Replacement (Rear Wheel); Caliper Removal And Disassembly (Rear Wheel) - Suzuki DR350 Service Manual

BRAKE PAD REPLACEMENT
• Remove the rear wheel. (Refer to page 6·20.1
• Remove the caliper cover.
NOTE:
Do not operate the brake while dismounting the rear wheel.
• Remove th e brake pads by removing the pads mounting
bolts.
CAUTION :
Replace the brake pad as a set , otherwise braking perfor-
mance will be adversely
affected.
• Reassemble and remount the caliper . (Refer to page
6- 23.)
CALIPER REMOVAL AND DISASSEMBLY
• Remove the rear wheel. (Refer to page 6· 20.)
• Remove the caliper cover .
• Disconnec t the brake hose and catch the brake fluid in
a suitable rece ptacle .
• Remove the caliper.
• Remove the caliper holder.
• Remove the pads by removing the mounting bolts .
• Place a rag over the piston to prevent popping up. Force
out the piston with a air gun.
CAUTION :
00 not use high pressure air to prevent piston damage .
• Remove the dust sea l and piston seal.
CHASSIS 6·24