Valve Guide Servicing - Suzuki DR350 Service Manual

VALVE GUIDE SERVICING
• Remove the valve guide with the special tool.
09916 44310: Valve guide remover
• Ae-finish th e valve guide holes in cylinder head with a
10. 8 mm reamer and handle.
09916·34580: 10.8
mm reamer
09916·34541 : Handl.
• Fit
a ri ng to
each va lve guide. Be sure to use new rings
and valve guides. Rings and valve guides removed in dis-
sassembly must be disca rded.
• Lubrica te each valve guide and drive the guide into the
guide hole with a valve guide installer .
09916·44310 : Valve guide installer and remover
• After fining valve guides, re-finish their guiding bores with
a 5 .0 mm reamer and handle . Be su re to c lean and oil
the guides after reaming .
09916 -34570 : 5 .0
mm reamer
09916· 34541 : Handl.
• Install the valve spring seat
<D.
Be careful not to confuse
the lower sea t with the sp rin g retainer
®.
ENGINE 3·18