Rear Shock Absorber (Dr350P); Shock Absorber Spring Pre-Load Adjustment (Dr350P) - Suzuki DR350 Service Manual

12·23 OR350P/SP 1'93·MOOEU
REAR SHOCK ABSORBER (DR350P)
SHOCK ABSORBER SPRING PRE-LOAD
ADJUSTMENT
Using the universal clamp wrench . adjust the spring tension
of the shock absorber by turning the spring pre-load adjuster
ring as follows.
Standard spring pre- set length : 268 .2 mm (10 .6 in)
09910·6061' : Universal clamp wrench
CAUTION :
Ahar adjusting the pre-load. tighte n the spring adjuster lock
ring securely .
SETTING TABLE
Spring length
STO : 268. 2
mm
110 .6
in)
Softer : 273.2 mm 110 .8 in)
Stiffer : 260 .2 mm 110 .2 in)
Damping force adjuster (STO)
Compression : Fully turned ·out position
Rebound :
2'h
turned-out position from the fully
turned-in pos ition .
NOTE:
Fully turned-in position provides stiffes t damping force.