Cylinder Head; Camshaft Installation - Suzuki DR350 Service Manual

CYLINDER HEAD
• With the head snug ly seated on the cylinder, secu re
it
by tightening the bolts diagonally . Tighten eac h bolt to
the speci fi ed t orque.
Tightening torque :
35 - 40 N' m 13. 5 - 4.0 kg-m . 25.5 - 29.0 Ib-Itl
• After tightening the cylinder head bolts to the spec ific a-
tion, tighten the cylinder head nuts and cylind er base
nuts.
Tightening torque :
23-27 N'm 12.3 - 2.7 kg ·m . 16 .5 - 19. 5 Ib·ltl
CAMSHAFT
• Align " T" mark
CD
on the magneto rotor w ith the index
mark
®
on th e crankcase keepi ng the c amshaft drive
chain pulled upward.
CAUTION:
If crankshaft is turned without drawing the camshaft drive
chain upward. the chain will be caught between crankcase
and cam chain drive sprocket. I
NOTE:
Apply grease on the cam sprocke t loca ting pin and install
the p in into the camshaft.
• Install the C-ring into the its groove of t he cylinder head .
ENGINE 3·44