Size Error - Minolta Di350 Service Manual

FrameMaker Ver.5.5E(PC) Di350 TROUBLESHOOTING
98.12.09
3-2.

Size Error

The following warning screen appears after a misfeed display has been reset if the actual
size of the paper loaded in a paper source differs from the paper size set for that particular
paper source.
[1st to 5th Drawer]
1st to 5th Drawer: A size error is indicated by a highlighted paper source in the copier
<Resetting the Size Error Display>
Slide out the drawer, then slide it back in, or load paper in the Manual Bypass Tray.
<Causes of a Size Error>
• Wrong paper size settings have been made.
• The user loads paper of a size different from what is set for the paper source.
• Two or more sheets of paper are being taken up and fed in.
1171T009CA
overview display. (In the above example, there is a size error in the
2nd Drawer.)
[Manual Bypass]
T-10
1171T010CA