Minolta Di350 Service Manual page 97

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
Touch Panel
Display
Dry Key Set
Function Limit
Special Image
Quality
<Printer>
Touch Panel
Display
Edge Erase
Loop Adjustment
Tech. Rep. Mode
Setting (The default is
Select whether to display the Dry key for "User Management" of Utility.
If the key is to be displayed, select whether to dry only the Scanner or
both Scanner and Drum.
Scanner
Select whether to limit ("ON") the functions to be set on the control
panel or not ("OFF").
ON
OFF
Select whether to enable the selection of Special Image Quality for
"Density Priority" of User's Choice (applicable on a case-by-case
basis).
Touching the " " key on the System Set menu selects or cancels
this function.
Key high-
lighted
Key not high-
lighted
Setting (The default is
Set the erase width on the leading, trailing, right, and left edge of the
image.
Leading
Trailing
Right/Left
Set the loop length to be formed before the Synchronizing Rollers.
1st Drawer
Other Drawers
Duplex & Manual
Tech. Rep. Choice
Scanner & Drum
Enables the functions other than Orig.
Copy and Auxiliary.
Enables all functions (no Limit).
The Special Image Quality key is displayed.
The Special Image Quality key is not dis-
played.
0mm.........................
Smaller
-5mm........................
Smaller
S-19
Highlighted ).
Disable
).
Highlighted
...................... 5mm
4
0 .................... +5mm
Greater
Greater