8.6 When the Message "PAPER SIZE ERROR" Appears
8.6
When the Message "PAPER SIZE ERROR" Appears
If the paper size specified for a paper tray differs from the size of the paper loaded
in the tray, the message shown below appears when paper is fed from that tray.
For Tray1
1
Select "TRAY1 PAPER".
❍
"Selecting the "PAPER SOURCE SETUP" menu" on page 7-15
2
Press the [1] key of the 10-Key
Pad, and then specify the correct
paper size and type.
❍
"Specifying the Setting for
"TRAY1 PAPER"" on
page 7-16
3
Remove the Bypass Tray, and
then remove all paper from the
tray.
Di1610f
A5
B5
8
A4
8-19