Paper Take-Up Retry Mechanism - Minolta Di350 Service Manual

FrameMaker Ver.5.5E(PC) Di350 GENERAL, MECHANICAL/ELECTRICAL
98.12.18
2. Manual Feed Paper Take-Up Detection
• The Manual Feed Paper Take-Up Sensor detects a sheet of paper that is fed via the Man-
ual Bypass Tray.
• The size and type of the paper for manual feed are set on the control panel.
Manual Feed Paper Take-Up Sensor (PC8)
Electrical Component
PC8
1171SBM1407A

14-7. Paper Take-Up Retry Mechanism

• To minimize the occurrence of a paper misfeed due to a slippery Paper Take-Up Roll, the
Paper Take-Up Solenoid is energized a second time if a sheet of paper fails to reach the
Synchronizing Roller Sensor within a given period of time after the solenoid has been
energized first.
• A paper take-up misfeed results if the sheet of paper does not reach the Synchronizing
Roller Sensor even after two paper take-up sequences.
<Paper Present: Unblocked (H)>
<Paper Not Present: Blocked (L)>
Control Signal
PJ4A-7B
M-38
1167M086AA
1167M085AA
Unblocked
H
Blocked
L