Minolta Di350 Service Manual page 231

FrameMaker Ver.5.5E(PC) Di350 TROUBLESHOOTING
98.12.09
6. Adjustment items (registration, focus, etc.)
• Among the adjustment items given in DIS/REASSEMBLY, ADJUSTMENT, is there any
adjustment that may remedy the image failure?
7. Input system (IR) or output system (engine)?
• Run "F12" which can be selected as follows: Tech. Rep. Mode → Function.
• If the test pattern output has the same problem as the copy image:
→ Check the output system.
• If the test pattern output is normal:
→ Check the input system.
• Make a copy at a different zoom ratio.
Original
Reduction
Check the input system.
Original
Reduction
Check the output system.
Full size
Full size
1167T020AB
T-44